setup for new NetworkManager
This commit is contained in:
176
ap-setup.sh
176
ap-setup.sh
@@ -7,35 +7,36 @@
|
||||
# SPDX-License-Identifier: GPL-2.0
|
||||
|
||||
# Wireless Access Point Raspberry Pi Setup
|
||||
|
||||
function get_ap_params() {
|
||||
echo ""
|
||||
wapssidok=0
|
||||
while [ "$wapssidok" -ne 1 ]
|
||||
wapssidok="no"
|
||||
while [[ "$wapssidok" == "no" ]]
|
||||
do
|
||||
echo "This access point will need an SSID. This is what will appear"
|
||||
echo "as the name of this terminal when other devices connect."
|
||||
echo -n "Please enter the desired SSID for this access point: "
|
||||
read wapssid
|
||||
if [ "$wapssid" = "" ]
|
||||
if [[ "$wapssid" = "" ]]
|
||||
then
|
||||
echo "SSID cannot be blank. Try again."
|
||||
else
|
||||
wapssidok=1
|
||||
wapssidok="yes"
|
||||
fi
|
||||
done
|
||||
wappassok=0
|
||||
while [ "$wappassok" -ne 1 ]
|
||||
wappassok="no"
|
||||
while [[ "$wappassok" == "no" ]]
|
||||
do
|
||||
echo "You will need to set a passphrase for this access point. It should"
|
||||
echo "be at least 8 characters in length and cannot be blank."
|
||||
echo -n "Please enter the desired passphrase for this access point: "
|
||||
read wappass
|
||||
wappasslen=`echo -n $wappass | wc -m`
|
||||
if [ "$wappass" = "" -o "$wappasslen" -lt 8 ]
|
||||
wappasslen=$(echo -n $wappass | wc -m)
|
||||
if [[ "$wappass" == "" || $wappasslen -lt 8 ]]
|
||||
then
|
||||
echo "Passphrase doesn't satisfy requirements above. Try again."
|
||||
else
|
||||
wappassok=1
|
||||
wappassok="yes"
|
||||
fi
|
||||
done
|
||||
# Save parameters in config file
|
||||
@@ -43,8 +44,76 @@ function get_ap_params() {
|
||||
sed -i 's,'wappass=.*','wappass="\"$wappass\""',' /etc/piwifiap.conf
|
||||
}
|
||||
|
||||
current_user=`whoami`
|
||||
if [ "$current_user" != "root" ]
|
||||
function config_systemd-networkd() {
|
||||
echo "Configuring as wireless access point using systemd-networkd."
|
||||
get_ap_params
|
||||
# Save network system in config file
|
||||
sed -i 's,'network_system=.*','network_system="\"systemd-networkd\""',' /etc/piwifiap.conf
|
||||
|
||||
apt install hostapd
|
||||
systemctl unmask hostapd
|
||||
systemctl enable hostapd
|
||||
echo "[NetDev]" >/etc/systemd/network/bridge-br0.netdev
|
||||
echo "Name=br0" >>/etc/systemd/network/bridge-br0.netdev
|
||||
echo "Kind=bridge" >>/etc/systemd/network/bridge-br0.netdev
|
||||
echo "[Match]" >/etc/systemd/network/br0-member-eth0.network
|
||||
echo "Name=eth0" >>/etc/systemd/network/br0-member-eth0.network
|
||||
echo "" >>/etc/systemd/network/br0-member-eth0.network
|
||||
echo "[Network]" >>/etc/systemd/network/br0-member-eth0.network
|
||||
echo "Bridge=br0" >>/etc/systemd/network/br0-member-eth0.network
|
||||
systemctl enable systemd-networkd
|
||||
mv /etc/dhcpcd.conf /etc/dhcpcd.conf.old
|
||||
echo "denyinterfaces wlan0 eth0" >/etc/dhcpcd.conf
|
||||
cat /etc/dhcpcd.conf.old >>/etc/dhcpcd.conf
|
||||
echo "interface br0" >>/etc/dhcpcd.conf
|
||||
rfkill unblock wlan
|
||||
echo "country_code=US" >/etc/hostapd/hostapd.conf
|
||||
echo "interface=wlan0" >>/etc/hostapd/hostapd.conf
|
||||
echo "bridge=br0" >>/etc/hostapd/hostapd.conf
|
||||
echo "ssid=$wapssid" >>/etc/hostapd/hostapd.conf
|
||||
echo "hw_mode=g" >>/etc/hostapd/hostapd.conf
|
||||
echo "channel=7" >>/etc/hostapd/hostapd.conf
|
||||
echo "macaddr_acl=0" >>/etc/hostapd/hostapd.conf
|
||||
echo "auth_algs=1" >>/etc/hostapd/hostapd.conf
|
||||
echo "ignore_broadcast_ssid=0" >>/etc/hostapd/hostapd.conf
|
||||
echo "wpa=2" >>/etc/hostapd/hostapd.conf
|
||||
echo "wpa_passphrase=$wappass" >>/etc/hostapd/hostapd.conf
|
||||
echo "wpa_key_mgmt=WPA-PSK" >>/etc/hostapd/hostapd.conf
|
||||
echo "wpa_pairwise=TKIP" >>/etc/hostapd/hostapd.conf
|
||||
echo "rsn_pairwise=CCMP" >>/etc/hostapd/hostapd.conf
|
||||
if dpkg -l|grep webmin >/dev/null 2>&1
|
||||
then
|
||||
wget -c http://github.com/pjz/webmin-modules/releases/download/v1.0/hostap.wbm.gz
|
||||
gzip -d hostap.wbm.gz
|
||||
/usr/share/webmin/install-module.pl hostap.wbm
|
||||
fi
|
||||
echo ""
|
||||
echo ""
|
||||
}
|
||||
|
||||
function config_NetworkManager() {
|
||||
echo "Configuring as wireless access point using NetworkManager."
|
||||
rfkill unblock wlan
|
||||
get_ap_params
|
||||
|
||||
# Clean up a possible failed previous attempt
|
||||
nmcli con del piwifi-ap >/dev/null 2>&1
|
||||
nmcli con del piwifi-ethernet >/dev/null 2>&1
|
||||
nmcli con del piwifi-apbridge >/dev/null 2>&1
|
||||
|
||||
# Save network system in config file
|
||||
sed -i 's,'network_system=.*','network_system="\"NetworkManager\""',' /etc/piwifiap.conf
|
||||
|
||||
nmcli device wifi hotspot ssid $wapssid password $wappass
|
||||
nmcli connection add type bridge con-name 'Bridge' ifname bridge0
|
||||
nmcli connection add type ethernet slave-type bridge con-name 'Ethernet' ifname eth0 master bridge0
|
||||
nmcli connection modify 'Hotspot' master bridge0
|
||||
nmcli connection up Bridge
|
||||
nmcli connection up Hotspot
|
||||
}
|
||||
|
||||
current_user=$(whoami)
|
||||
if [[ "$current_user" != "root" ]]
|
||||
then
|
||||
echo "You must have root privileges to run this setup."
|
||||
echo "Try 'sudo $0'"
|
||||
@@ -56,7 +125,7 @@ echo "If this terminal connects to a network using ethernet, it can be configure
|
||||
echo "as a wireless access point for other terminals. Would you like to configure"
|
||||
echo -n "this terminal as an access point? [y/N]: "
|
||||
read wapconf
|
||||
if [ "$wapconf" = "Y" -o "$wapconf" = "y" ]
|
||||
if [[ "$wapconf" == "Y" || "$wapconf" == "y" ]]
|
||||
then
|
||||
# Determine if we are using NetworkManager or systemd-networkd
|
||||
echo ""
|
||||
@@ -66,89 +135,10 @@ then
|
||||
cp -Rv apsetup/etc/* /etc
|
||||
if systemctl status dhcpcd.service|grep -q "Active: active (running)"
|
||||
then
|
||||
echo "Configuring as wireless access point using systemd-networkd."
|
||||
get_ap_params
|
||||
# Save network system in config file
|
||||
sed -i 's,'network_system=.*','network_system="\"systemd-networkd\""',' /etc/piwifiap.conf
|
||||
|
||||
apt install hostapd
|
||||
systemctl unmask hostapd
|
||||
systemctl enable hostapd
|
||||
echo "[NetDev]" >/etc/systemd/network/bridge-br0.netdev
|
||||
echo "Name=br0" >>/etc/systemd/network/bridge-br0.netdev
|
||||
echo "Kind=bridge" >>/etc/systemd/network/bridge-br0.netdev
|
||||
echo "[Match]" >/etc/systemd/network/br0-member-eth0.network
|
||||
echo "Name=eth0" >>/etc/systemd/network/br0-member-eth0.network
|
||||
echo "" >>/etc/systemd/network/br0-member-eth0.network
|
||||
echo "[Network]" >>/etc/systemd/network/br0-member-eth0.network
|
||||
echo "Bridge=br0" >>/etc/systemd/network/br0-member-eth0.network
|
||||
systemctl enable systemd-networkd
|
||||
mv /etc/dhcpcd.conf /etc/dhcpcd.conf.old
|
||||
echo "denyinterfaces wlan0 eth0" >/etc/dhcpcd.conf
|
||||
cat /etc/dhcpcd.conf.old >>/etc/dhcpcd.conf
|
||||
echo "interface br0" >>/etc/dhcpcd.conf
|
||||
rfkill unblock wlan
|
||||
echo "country_code=US" >/etc/hostapd/hostapd.conf
|
||||
echo "interface=wlan0" >>/etc/hostapd/hostapd.conf
|
||||
echo "bridge=br0" >>/etc/hostapd/hostapd.conf
|
||||
echo "ssid=$wapssid" >>/etc/hostapd/hostapd.conf
|
||||
echo "hw_mode=g" >>/etc/hostapd/hostapd.conf
|
||||
echo "channel=7" >>/etc/hostapd/hostapd.conf
|
||||
echo "macaddr_acl=0" >>/etc/hostapd/hostapd.conf
|
||||
echo "auth_algs=1" >>/etc/hostapd/hostapd.conf
|
||||
echo "ignore_broadcast_ssid=0" >>/etc/hostapd/hostapd.conf
|
||||
echo "wpa=2" >>/etc/hostapd/hostapd.conf
|
||||
echo "wpa_passphrase=$wappass" >>/etc/hostapd/hostapd.conf
|
||||
echo "wpa_key_mgmt=WPA-PSK" >>/etc/hostapd/hostapd.conf
|
||||
echo "wpa_pairwise=TKIP" >>/etc/hostapd/hostapd.conf
|
||||
echo "rsn_pairwise=CCMP" >>/etc/hostapd/hostapd.conf
|
||||
if dpkg -l|grep webmin >/dev/null 2>&1
|
||||
then
|
||||
wget -c http://github.com/pjz/webmin-modules/releases/download/v1.0/hostap.wbm.gz
|
||||
gzip -d hostap.wbm.gz
|
||||
/usr/share/webmin/install-module.pl hostap.wbm
|
||||
fi
|
||||
echo ""
|
||||
echo ""
|
||||
config_systemd-networkd
|
||||
elif systemctl status NetworkManager.service|grep -q "Active: active (running)"
|
||||
then
|
||||
echo "Configuring as wireless access point using NetworkManager."
|
||||
rfkill unblock wlan
|
||||
get_ap_params
|
||||
|
||||
# Clean up a possible failed previous attempt
|
||||
nmcli con del piwifi-ap >/dev/null 2>&1
|
||||
nmcli con del piwifi-ethernet >/dev/null 2>&1
|
||||
nmcli con del piwifi-apbridge >/dev/null 2>&1
|
||||
|
||||
# Save network system in config file
|
||||
sed -i 's,'network_system=.*','network_system="\"NetworkManager\""',' /etc/piwifiap.conf
|
||||
|
||||
nmcli con add type bridge \
|
||||
con-name piwifi-apbridge \
|
||||
ifname bridge0
|
||||
|
||||
nmcli con add type ethernet \
|
||||
slave-type bridge \
|
||||
con-name piwifi-ethernet \
|
||||
ifname eth0 \
|
||||
master bridge0
|
||||
|
||||
nmcli con add type wifi \
|
||||
ifname wlan0 \
|
||||
con-name piwifi-ap \
|
||||
autoconnect yes \
|
||||
ssid "$wapssid" \
|
||||
slave-type bridge \
|
||||
master bridge0 \
|
||||
wifi-sec.key-mgmt wpa-psk \
|
||||
wifi-sec.psk "$wappass" \
|
||||
802-11-wireless.mode ap \
|
||||
802-11-wireless.band bg
|
||||
|
||||
nmcli con up piwifi-apbridge
|
||||
nmcli con up piwifi-ethernet
|
||||
nmcli con up piwifi-ap
|
||||
config_NetworkManager
|
||||
else
|
||||
echo "Unable to determine what type of network configuration (systemd-networkd"
|
||||
echo "or NetworkManager) your system uses. Automatic setup cannot continue."
|
||||
|
||||
Reference in New Issue
Block a user